Ball Bearings 6201-2RS

Hangzhou Huaxing Kechuang Holding Group Co., Ltd. is one of the leading manufacturers and suppliers of ball bearings 6201-2rs in China. As we have world-leading production equipment and strong manufacturing capabilities, we warmly welcome you to buy bulk high quality bearings at competitive price from our factory.

Single Row Deep Groove Ball Bearing 6201-2RS, 6202-2RS, 6203-2RS

6201-2RS, 6202-2RS and 6203-2RS are classic 6200-series double rubber sealed deep groove ball bearings, specially optimized for the long-term continuous operation characteristics of household and industrial electric fans. With moderate outer diameter and wall thickness, these models achieve an ideal balance of structural rigidity, load capacity and compact installation size, perfectly matching the internal assembly space of fan motors.

Equipped with high-performance 2RS double contact rubber seals, the bearings form a fully closed protective structure. They effectively block indoor floating dust, fabric lint, fine particles and slight humid air, preventing internal grease contamination and leakage. This solves the common problems of fan bearing jamming, noise increase and slow rotation caused by long-term dust accumulation.

These fan-dedicated bearings feature low friction torque, ultra-low noise and stable high-speed rotation performance. They adapt to the frequent start-stop and long-hour continuous working mode of electric fans. Pre-filled with low-temperature, long-life silent grease, they maintain smooth and quiet operation for years without frequent maintenance. Meanwhile, they can bear stable radial load and slight axial load generated by fan blade rotation, ensuring uniform stress and durable operation of the fan spindle.

• HXB fan Bearings have low friction, stable rotation and low noise during long-term operation.
• Good wear resistance and fatigue resistance to ensure long service life.
• Excellent temperature resistance, no deformation or failure under continuous operating temperature.
• Tight fit with motor shaft and housing, no looseness or radial runout.
• Dustproof and leakage-proof performance shall meet design standards.

The three 6200 series 2RS models are mainstream universal bearings for fan motor assembly, covering full-size civilian and small industrial electric fan equipment, with clear size matching for different fan specifications.

6201-2RS is suitable for small-sized low-power fans, including desktop mini fans, portable folding fans, small USB cooling fans and miniature equipment cooling fans. Its compact size adapts to narrow motor inner space of small fans, ensuring lightweight and silent operation.

6202-2RS is the most versatile fan bearing model, widely applied in standard household electric fans, including standing fans, table fans, wall-mounted fans and vertical circulation fans. It balances load capacity and rotation flexibility, fully meeting the daily long-term stable operation needs of household fans.

6203-2RS is customized for medium-power and high-speed fans, applicable to industrial cooling fans, workshop exhaust fans, high-speed air circulation fans and large household floor fans. With higher structural rigidity and load resistance, it withstands the strong rotation vibration of large fan blades and supports long-duration high-speed stable operation.

All three sealed models are applicable to indoor conventional working environments with normal temperature, slight dust and dry air. They effectively avoid abnormal noise and rotation lag of fans, greatly improving the operating stability and service life of fan equipment.

HXB has a set of more than 10 years of technical optimization precipitation, with the international advanced development concept of the development process, with the ability of design analysis, engineering production, test evaluation and technical management.

It has dozens of national patents. The technicians are proficient in using computer aided design software. PLM system is being progressively implemented.

Experimental Testing / Testing Ability

HXB has a comprehensive laboratory (including durability, physical and chemical, high and low temperature cycle, enamel-wire laboratory, performance, gear, magnetic observation room), with dozens of various equipment and instruments, with the ability to test and verify the performance of new products and components such as magneto, starter motor, generator electronic products. We will support you in selecting the best fan bearings for your application.

∗ 30 years of dedicated development

HXB was founded in 1995, with nearly 30 years of dedicated development, HXB now operates6 subsidiaries.

 

∗ 2 high-tech R&D centers

∗ 2 modern manufacturing factories - Hangzhou Yijia Precision Bearing Co., Ltd. and Zhejiang Ruiyang Bearing Technology Co., Ltd.

∗ Supported by advanced digital MES and SPC management systems

∗ IATF16949:2016, ISO9001:2015 and ISO14001 certifications

∗ High-end equipment and high-quality material

1. Hangzhou Factory - YJB

Founded in June 2007, YJB is located in Hangzhou. As a subsidiary of HXB Group, we are a national high-tech enterprise and provincial science & technology enterprise specializing in R&D and manufacturing of high-precision, high-speed, advanced, special and professional bearings.

Core Capabilities & Intelligent Manufacturing

• Product Size: Inner diameter Φ3–Φ300mm
• Precision Classes: P2, P4 (ultra-precision grades)
• Annual Capacity: 3 million sets of precision bearings in a lean & intelligent factory
• Equipment Investment: Over RMB 3 million in world-leading precision testing instruments
• Digital Transformation: with full deployment of MESYS bearing design platform, ERP, MES, WMS, SPC real-time quality monitoring and OA systems, building a benchmark smart manufacturing plant.

2. Huzhou Factory

In 2021, the deep groove ball bearing factory relocated from Hangzhou to Huzhou. It operate in a 10,000㎡ production facility with a team of 75 employees, focused on the R&D, and manufacturing of high-performance deep groove ball bearings.

We maintain a professional engineering and quality system to ensure stable precision and reliability.

Engineering Team: 4 bearing design & process engineers, accounting for 5% of staff.

Quality Team: 15 quality personnel, including 2 quality engineers, 20% of staff, covering incoming inspection, in-process control and final testing.